Angled Corner Plate Leg Fittings

ANGL-FX

Quick Overview

Turn a straight tapered leg into an angled accent leg.
If the legs have an M8 dowel central fitting then this special T nut will angle the legs giving a completely different look.

60 mm square.

M8 nut angle from plinth is 12.5 degrees. Hole diameter in from will vary depending on the length of dowel exposed through nut.

M8 Dowel Length / Hole diameter required

40 mm exposed length - hole diam 23 mm

35 mm exposed length - hole diam 20 mm

30 mm exposed length - hole diam 18 mm


Code ANGL-FX - sold in sets of 4

4 screws required (not provided) for each nut to go through 5.5mm dia holes.

Availability: In stock

Excl. VAT: $8.85 Incl. VAT: $10.62
Per set 4
OR

Details

Turn a straight tapered leg into an angled accent leg.
If the legs have an M8 dowel central fitting then this special T nut will angle the legs giving a completely different look.
60 mm square.
M8 nut angle from plinth is 12.5 degrees. Hole diameter in from will vary depending on the length of dowel exposed through nut.
M8 Dowel Length / Hole diameter required
40 mm exposed length - hole diam 23 mm
35 mm exposed length - hole diam 20 mm
30 mm exposed length - hole diam 18 mm

Code ANGL-FX - sold in sets of 4
4 screws required (not provided) for each nut to go through 5.5mm dia holes.

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.