Knowle Sanded Wood Finials
These sanded beech Knowle finials could have many uses but primarily are for Knowle style sofas and chairs. They could be painted or polished, bound in cord or covered in fabric. They are 55 mm in diameter and 100 mm high (excl dowel). They measure 16mm from screw at top to flat outside edge. M8 Metal dowels and 'T' nuts are supplied for ease of fitting.
Code KNOLE/1 sold individually

Polished Wooden Knowle Finial
Shown in Mahogany polished finish this elegant wooden acorn like knowle finial fires the imagination. Apart from adorning your knowle sofa or chairs it could make a curtain pole unique or decorate a headboard or bed. 112mm x 66mm. Measures 26mm from screw at top to flat outside edge. Comes complete with M8 metal dowell and 'T' nut fitings.
Code KNOLE/2 - £9.40 ea Mahogany Finish.
Code KNOLE/2A - £9.85 ea Antiqued finish

M8 dowel and 'T' nut fixings included in the price.

The Powys in Mahogany or Natural Polished finish
Turned Hardwood Legs - Mahogany or Natural Polished Finish. This is Mr Chunky himself, impressive legs with one row of turning. They come complete with M8 metal dowel and 'T' nut fittings. They are 90 mm at their widest diameter and 126 mm high. They measure 36mm from screw at top to the flat outside edge.
Code PL028 - set of 4 Mahogany finish.
Code PL028N - set of 4 Natural polished finish
If you have hard floors why not place a felt glide on the bottom to save them marking your floor? Go to glides in the index.

Queen Anne Wooden Legs
Carved from good hardwood. Ready to fix to your own frame or board. Stain and polish or paint to your own requirements. Only available in sets of 4 Sanded wood finish only.
Code L1A - 4 inches tall
Code L1B - 6 inches tall
Code L1C - 9 inches tall
Code L1D - 12 inches tall
Code L1E - 15 inches tall

The London -Sanded Beech Turned Legs
A classic sanded turned leg in solid beech. Stands 9 inches (224mm) tall or 10.5 inches (270 mm) tall when fitted with a 1 1/8 inch brass socket castor sold separately (see castors via index). It is 2.5 inches (65mm) at its widest point and comes complete with M8 metal dowel and T nut fitting. It also measures 30mm from screw at top to flat outside edge.
Code L9 - price includes fittings but excludes brass castors. Sanded finish only.
for castors go to Brass Castors in the index and choose Code C4A 1 1/8 inch round socket castors

The Erddig
This leg is elegant classic and yet contemporary - it just had to join our collection. Let your imagination run wild when you think of the possibilities for this solid wood leg.
It is available in only one finish antiqued (as pictured). A tall 215mm x 100mm at its widest diameter. It measures 20mm from the screw at the top to the flat outside edge.
The solid brass castors are included in the price as is the M8 metal dowel and 'T' nut fixing.
Code WF1899ANT set 4 in antique finish
Available in half sets just order 0.5

Bun Foot
The original solid hardwood bun foot. Their uses are endless:

Transform a suite in minutes by removing the castors and fitting solid wood bun feet.

Raise the height of an arm chair or bookcase

Make a simple foot stool
approx. size 85 mm diameter and 43 mm high. They also measure 26mm from screw at top to flat outside edge.
(For larger size see BIG FOOT 110 mm dia x 40 mm high.)
Available in Mahogany or natural polished finish. Complete with M8 metal dowel and T nut fittings. If you are using them on a polished/hard floor why not replace the metal glide on the bottom with felt tipped glides Code C7 put about 3 to 4 glides to each foot this gives good balance or use 38 mm dia sticky felt pads Code C8B (see Glides in index)
Code WFA0801 Set of 4 in Magogany polish
Code WFA0805 Set of 4 in Natural polish

Fancy Bun Foot - Mahogany finish
When a more decorative look is required, why not use these fancy solid hardwood bun feet? Available in mahogany polished finish. 83mm diameter and 53mm high, they come complete with M8 metal dowel and T nut fittings. They also measure 34mm from the screw at top to the flat outside edge.
Code WFA0801F Set of 4 Mahogany Bun feet Inl Ftgs
If you have hard floors why not replace the metal glide on the bottom with felt? Go to glides in the index.

‘Square’ Big Jim
Update your furniture with this stylish leg. Try adding a box stool to your lounge using the same legs, its what the best furniture is wearing. With a height of just 90 mm and 165 mm span in both directions it can replace the existing feet or castors on your chairs or sofa and make a startling difference to the overall look. Prepared with 2 x 6mm fixing holes (fixings not provided). Available in two popular polished finishes, natural or mahogany.
Approx 165 mm sqr x 90 mm tall
Code WF0081 - Natural
Code WF0081M - Mahogany

The Oswestry (Pictured in Sanded finish)
This curvy stylish leg is the latest addition to our family. It comes in a very popular height for chairs or stools. It measures approximately 155 mm (6 ¼ ") tall by 70mm (2 ¾ ") diameter at the widest point. At the very bottom of the leg it is 32mm (approx 1 1/4") diameter. It also measures 32mm from the screw at top to the flat outside edge. It will look just as attractive in a paint effect or polish finish. Supplied complete with M8 dowel and 'T' nut for easy fixing. (Price includes fittings)

Available Sanded, Mahogany or Natural Polished Finish. See drop down box for details. Code WF0811 Sanded finish
Code WF0811M Mahogany Polished Finish
Code WF0811N Natural Polished Finish